Select Page

China 36V-48V CE 350W-750W 500W Rear Drive Geared Dc Hub Brushless Motor E Bike and E-bike Conversion Kit Rw11 Ebike Optional gear patrol

Voltage: 36V-48V
Design and style: Brushless
Fashion: ebike
Design Quantity: RW11
Max speed: a hundred and eighty-380
Rated Performance: >=seventy nine
Reduction ratio: 1:five
weight: 4.five
Spoke measurement: 12G/13G
Create in speed sensor: Optional
Freewheel: Cassette
Certification: CE/Rohs
Noice quality: <=55
Ingress security: IP54
Packaging Details: Cartons
Port: ZheJiang

Items Description Item Superiority1 Extended-lifestyle(bearing), lengthy-cycle maintenance. basic and practical upkeep.;2 No mechanical converter,provent the dust coming into to the motor. 3 Powerful loading capability,satisfy the vehicle’s protrusion blocking requirments,the motor rotor has a large permanentmagnentic submitted ;4 Superb startup efficiency,hysteresis free damping consumes kinetic energy,higher-torque climbing bility. 5 Substantial function efficiency,reduced-electricity consumption,prolonged-HangZhouage;6 Superb drinking water-proof performance; 7 Several driving mode, CZPT TDP-918 Plastic woven cloth hemp cloth textile weaving machine loom can meet the most ofmarket loading requirements; 8 Higher overall performance and price ratio of motor 9 Minimal-noice, dependable operation. Electric powered bicycle componentsTrunkrun, with study and development and innovation as its vitality, was born to support modify cycling.

Standard Parasort of exhibitLcd-TFT
Adapltive Voltage24V/36V/48V
assistance equipment~3/~5/~nine
Test and certificationIngress securityIP65
If you have any concerns, you can immediately check with and give you what you want Major Features1. Brushless, lengthy lifestyle (bearing daily life), servicing free 2. The motor has no mechanical commutator to prevent dust from enteringthe motor and has substantial trustworthiness 3. Huge electricity and basic structure 4. Excellent commencing overall performance, no hysteresis dampingconsumption kinetic power, strong torque climbing capacity 5. Higher effectiveness, Solitary Electric powered Pump Trumpet Air CZPT Kit for Truck Van Practice Boat Air Compressor Twin Trumpet 12V 150db Vehicle Motorbike Air CZPT minimal electricity intake, and relatively extended HangZhouage 6. Large efficiency price tag ratio; 7. Excellent water-resistant functionality.
36V-48V CE 350W-750W 500W Rear Push Geared Dc Hub Brushless Motor E Bicycle And E-bicycle Conversion Package Rw11
DesignRW11Spoke Dimension12G/13G
Installation SituationRearInner Velocity-sensorOptional 1/6 PCS
Rated Power(W)350W-750WConnectorOptional
Rated Ratation Speed(rpm)a hundred and eighty-380FreewheelThread on Freewheel
Rated Efficiency(%)>80%Max Outdoors DiameterΦ158.8
Magnet PolestwentyFloor RemedyShinning.Sliver gray .Matte-black. Brilliant black
Reduction Ratio1:fiveNoice-grade(dB)<55
Weight(Kg)four.6Salt Spary(h)96
Put in Location Width(mm)a hundred and seventy-185Ingress SecurityIP54
Cabling RouteShaft ConcludeCertificationCE、ROHS
Recommend Goods Firm Details Exhibitions Certifications Delivery services FAQ Q1. What is your terms of packing?A: Typically, we pack our items in poly luggage, foams and then cartons.Q2. What is your conditions of shipping?A: EXW, FOB, CFR, CIF, DDU.Q3. How about your supply time?A: Typically, it will just take 3 to 60 days soon after obtaining your advance payment. For the standard Motor package with typical cable duration,shows and features, c45 double row motor sprockets hardness HRC40-50 we will ship it inside of 3 operating times following obtaining your payment, for the customized, make sure you consult usfor specifics with your buying quantity.This autumn. What is your sample policy?A: we generally ship the samples by courier, like TNT,UPS,DHL or FEDEX, our buyers require to pay out for the convey mail payment as well.Q5. Do you check all your products ahead of shipping and delivery?A: Of course, we have a hundred% take a look at just before shipping and deliveryQ6. How do you make our organization extended-expression and very good relationship?A:1. We maintain great good quality and competitive price to make certain our consumers benefit2. We respect each client as our friend and we sincerely do company and make pals with them, no matter the place they come from.3. Any tech or non-tech difficulties & inquiries, you should feel free to enable us know, we are going to usually stand behind what we have said and promised.


Hypoid Bevel Vs Straight Spiral Bevel – What’s the Difference?

Spiral gears come in many different varieties, but there is a fundamental difference between a Hypoid bevel gear and a Straight spiral bevel. This article will describe the differences between the two types of gears and discuss their use. Whether the gears are used in industrial applications or at home, it is vital to understand what each type does and why it is important. Ultimately, your final product will depend on these differences.

Hypoid bevel gears

In automotive use, hypoid bevel gears are used in the differential, which allows the wheels to rotate at different speeds while maintaining the vehicle’s handling. This gearbox assembly consists of a ring gear and pinion mounted on a carrier with other bevel gears. These gears are also widely used in heavy equipment, auxiliary units, and the aviation industry. Listed below are some common applications of hypoid bevel gears.
For automotive applications, hypoid gears are commonly used in rear axles, especially on large trucks. Their distinctive shape allows the driveshaft to be located deeper in the vehicle, thus lowering the center of gravity and minimizing interior disruption. This design makes the hypoid gearset one of the most efficient types of gearboxes on the market. In addition to their superior efficiency, hypoid gears are very easy to maintain, as their mesh is based on sliding action.
The face-hobbed hypoid gears have a characteristic epicycloidal lead curve along their lengthwise axis. The most common grinding method for hypoid gears is the Semi-Completing process, which uses a cup-shaped grinding wheel to replace the lead curve with a circular arc. However, this method has a significant drawback – it produces non-uniform stock removal. Furthermore, the grinding wheel cannot finish all the surface of the tooth.
The advantages of a hypoid gear over a spiral bevel gear include a higher contact ratio and a higher transmission torque. These gears are primarily used in automobile drive systems, where the ratio of a single pair of hypoid gears is the highest. The hypoid gear can be heat-treated to increase durability and reduce friction, making it an ideal choice for applications where speed and efficiency are critical.
The same technique used in spiral bevel gears can also be used for hypoid bevel gears. This machining technique involves two-cut roughing followed by one-cut finishing. The pitch diameter of hypoid gears is up to 2500 mm. It is possible to combine the roughing and finishing operations using the same cutter, but the two-cut machining process is recommended for hypoid gears.
The advantages of hypoid gearing over spiral bevel gears are primarily based on precision. Using a hypoid gear with only three arc minutes of backlash is more efficient than a spiral bevel gear that requires six arc minutes of backlash. This makes hypoid gears a more viable choice in the motion control market. However, some people may argue that hypoid gears are not practical for automobile assemblies.
Hypoid gears have a unique shape – a cone that has teeth that are not parallel. Their pitch surface consists of two surfaces – a conical surface and a line-contacting surface of revolution. An inscribed cone is a common substitute for the line-contact surface of hypoid bevel gears, and it features point-contacts instead of lines. Developed in the early 1920s, hypoid bevel gears are still used in heavy truck drive trains. As they grow in popularity, they are also seeing increasing use in the industrial power transmission and motion control industries.

Straight spiral bevel gears

There are many differences between spiral bevel gears and the traditional, non-spiral types. Spiral bevel gears are always crowned and never conjugated, which limits the distribution of contact stress. The helical shape of the bevel gear is also a factor of design, as is its length. The helical shape has a large number of advantages, however. Listed below are a few of them.
Spiral bevel gears are generally available in pitches ranging from 1.5 to 2500 mm. They are highly efficient and are also available in a wide range of tooth and module combinations. Spiral bevel gears are extremely accurate and durable, and have low helix angles. These properties make them excellent for precision applications. However, some gears are not suitable for all applications. Therefore, you should consider the type of bevel gear you need before purchasing.
Compared to helical gears, straight bevel gears are easier to manufacture. The earliest method used to manufacture these gears was the use of a planer with an indexing head. However, with the development of modern manufacturing processes such as the Revacycle and Coniflex systems, manufacturers have been able to produce these gears more efficiently. Some of these gears are used in windup alarm clocks, washing machines, and screwdrivers. However, they are particularly noisy and are not suitable for automobile use.
A straight bevel gear is the most common type of bevel gear, while a spiral bevel gear has concave teeth. This curved design produces a greater amount of torque and axial thrust than a straight bevel gear. Straight teeth can increase the risk of breaking and overheating equipment and are more prone to breakage. Spiral bevel gears are also more durable and last longer than helical gears.
Spiral and hypoid bevel gears are used for applications with high peripheral speeds and require very low friction. They are recommended for applications where noise levels are essential. Hypoid gears are suitable for applications where they can transmit high torque, although the helical-spiral design is less effective for braking. For this reason, spiral bevel gears and hypoids are generally more expensive. If you are planning to buy a new gear, it is important to know which one will be suitable for the application.
Spiral bevel gears are more expensive than standard bevel gears, and their design is more complex than that of the spiral bevel gear. However, they have the advantage of being simpler to manufacture and are less likely to produce excessive noise and vibration. They also have less teeth to grind, which means that they are not as noisy as the spiral bevel gears. The main benefit of this design is their simplicity, as they can be produced in pairs, which saves money and time.
In most applications, spiral bevel gears have advantages over their straight counterparts. They provide more evenly distributed tooth loads and carry more load without surface fatigue. The spiral angle of the teeth also affects thrust loading. It is possible to make a straight spiral bevel gear with two helical axes, but the difference is the amount of thrust that is applied to each individual tooth. In addition to being stronger, the spiral angle provides the same efficiency as the straight spiral gear.

Hypoid gears

The primary application of hypoid gearboxes is in the automotive industry. They are typically found on the rear axles of passenger cars. The name is derived from the left-hand spiral angle of the pinion and the right-hand spiral angle of the crown. Hypoid gears also benefit from an offset center of gravity, which reduces the interior space of cars. Hypoid gears are also used in heavy trucks and buses, where they can improve fuel efficiency.
The hypoid and spiral bevel gears can be produced by face-hobbing, a process that produces highly accurate and smooth-surfaced parts. This process enables precise flank surfaces and pre-designed ease-off topographies. These processes also enhance the mechanical resistance of the gears by 15 to 20%. Additionally, they can reduce noise and improve mechanical efficiency. In commercial applications, hypoid gears are ideal for ensuring quiet operation.
Conjugated design enables the production of hypoid gearsets with length or profile crowning. Its characteristic makes the gearset insensitive to inaccuracies in the gear housing and load deflections. In addition, crowning allows the manufacturer to adjust the operating displacements to achieve the desired results. These advantages make hypoid gear sets a desirable option for many industries. So, what are the advantages of hypoid gears in spiral gears?
The design of a hypoid gear is similar to that of a conventional bevel gear. Its pitch surfaces are hyperbolic, rather than conical, and the teeth are helical. This configuration also allows the pinion to be larger than an equivalent bevel pinion. The overall design of the hypoid gear allows for large diameter shafts and a large pinion. It can be considered a cross between a bevel gear and a worm drive.
In passenger vehicles, hypoid gears are almost universal. Their smoother operation, increased pinion strength, and reduced weight make them a desirable choice for many vehicle applications. And, a lower vehicle body also lowers the vehicle’s body. These advantages made all major car manufacturers convert to hypoid drive axles. It is worth noting that they are less efficient than their bevel gear counterparts.
The most basic design characteristic of a hypoid gear is that it carries out line contact in the entire area of engagement. In other words, if a pinion and a ring gear rotate with an angular increment, line contact is maintained throughout their entire engagement area. The resulting transmission ratio is equal to the angular increments of the pinion and ring gear. Therefore, hypoid gears are also known as helical gears.

China 36V-48V CE 350W-750W 500W Rear Drive Geared Dc Hub Brushless Motor E Bike and E-bike Conversion Kit Rw11 Ebike Optional     gear patrolChina 36V-48V CE 350W-750W 500W Rear Drive Geared Dc Hub Brushless Motor E Bike and E-bike Conversion Kit Rw11 Ebike Optional     gear patrol
editor by Cx 2023-06-28

Recent Posts


As one of leading hypoid-gear manufacturers, suppliers and exporters of mechanical products, We offer hypoid-gear and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.